Ellis.
06-01-2006, 06:41 AM
Okay, welcome to .x.Taurus.x.'s Stacking Guide. Truly sorry if this guide confuses you but I have truly tried my best to explain this properly. Before we start, you will need these items:
3 Z shelves
Area Coffee Table (which takes up 4 squares)
Mode Corner
Lodge Occassional Table (Takes up 1 space)
So if you already have those things, you're ready to start. Please follow the instructions VERY carefully.
1. Put down your tools that are listed above and reload the desired room. After, make sure the items that you wish to close stack are all in your hand. Once they are all in your hand, pick up 1 z shelf from your equipments and put it back down so that it is fresh from the hand. After, place the z shelf fresh from the hand on the desired square of which you wish to stack on.
2. Now, place the z shelf (not fresh from the hand) on top of the first z shelf. If I were close stacking yukkas, I'd put the yukka down on top of the second z shelf. Afterwards, remove the second z shelf. You should have a z shelf flat on the ground and a yukka on top with a gap between the 2 objects.
3. Now that you've used the z shelf, place the area table so that it is underneath the single yukka. Now, place a second yukka (from your hand) on top of the area table so that the first and second yukka are on the same square. Afterwards, remove the area table. From here, you should have a z shelf flat on the ground and 2 yukkas that are barely separated, and between them, a small gap.
4. Now that you've used the area table, place the mode corner on the same spot (on top of the first z shelf) and place the third yukka from your hand on top of it. Afterwards, remove it. From there you should have a z shelf flat on the ground and 3 yukkas closely spaced together and between them, a small gap.
5. After the mode corner, use the lodge occassional table. Place the table on top of the z shelf which is flat on the ground. Now take your 4th yukkas from your hand and place it on top of the lodge table and remove the lodge table afterwards. From there, you should have the same z shelf flat on the ground, 4 yukkas closely spaced together, and a small gap between them.
Now, you have basically completed most of close stacking. But if your structure is much too short for your taste, simply place your 3rd z shelf on top of the first z shelf. But be warned, while stacking, you should NEVER remove the first z shelf from it's spot unless you're ready to stack on another square.
6. So if you want to go further than 4 levels, place your 3rd z shelf on top of your first z shelf. From there, you should have 2 z shelves on top of each other and 4 closely stacked yukkas on top of the two shelves. From there, place your 2nd z shelf on top of your 3rd z shelf (which is on top of you first z shelf). From there, you should see 3 z shelves on top of each other. Remove your 3rd z shelf (the one in the middle) and place your next yukka on top. After, remove your 2nd z shelf.
7. Right now, you should have 1 z shelf flat on the ground with 5 yukkas closely stacked on top with a gap between the two. From here, place your 3rd z shelf on top of your 1st z shelf (which is flat on the ground). Now, place your area table on top of the 3rd z shelf. From here, you should have 2 z shelves on top of each other with an area table on top. Remove your 3rd z shelf (the second one from the ground) so that there should be a small gap between the area table and the first z shelf. Now, place your next yukka on top of the area table and remove the area table afterwards.
8. Now, place your 3rd z shelf on top of your first z shelf again and place the mode corner on top of it. Remove your 3rd z shelf and add your next yukka on top of the mode corner. Remove your mode corner.
9. Place your 3rd z shelf (once again) on top of your first z shelf (which is the one flat on the ground) and place your lodge table on it. Remove your 3rd z shelf (which is the second one from the ground) and place your next yukka on top of your lodge occassional table.
Congratulations, you have completed 8 levels of close stacking. If your desired structure is still too short for your taste, please follow on for the last 2 instructions.
10. After, place your 3rd z shelf on top of your first z shelf once again. After, place your 2nd z shelf on top of your 3rd z shelf so that you would have 3 z shelves stacked on top of each other. From there, remove your 3rd z shelf (the one in the middle) and place it on top of your second z shelf as if you were stacking normally with 2 z shelves. From there, you should have 1 z shelf flat on the ground and 2 stacked on top of each other above it with a small gap in between. From there, remove your second z shelf (which is the one in the middle) and place your next yukka on top of your 3rd z shelf (which is now the highest one from the ground).
11. From here, if you understood the guide, you
should be seeing a small pattern. Follow the same pattern from here until your structure has reached the desired size. I hope you have not stressed too much over reading this complicated guide, but if you do not understand, please try and re read it over and over again carefully until you do. If not, pm me (.x.Taurus.x.) and I may be able to teach you personally on .com.
Thank you for reading my guide, I sincerely hope you enjoyed this.
Feel free to ask me questions,
.x.Taurus.x.
Ellis
3 Z shelves
Area Coffee Table (which takes up 4 squares)
Mode Corner
Lodge Occassional Table (Takes up 1 space)
So if you already have those things, you're ready to start. Please follow the instructions VERY carefully.
1. Put down your tools that are listed above and reload the desired room. After, make sure the items that you wish to close stack are all in your hand. Once they are all in your hand, pick up 1 z shelf from your equipments and put it back down so that it is fresh from the hand. After, place the z shelf fresh from the hand on the desired square of which you wish to stack on.
2. Now, place the z shelf (not fresh from the hand) on top of the first z shelf. If I were close stacking yukkas, I'd put the yukka down on top of the second z shelf. Afterwards, remove the second z shelf. You should have a z shelf flat on the ground and a yukka on top with a gap between the 2 objects.
3. Now that you've used the z shelf, place the area table so that it is underneath the single yukka. Now, place a second yukka (from your hand) on top of the area table so that the first and second yukka are on the same square. Afterwards, remove the area table. From here, you should have a z shelf flat on the ground and 2 yukkas that are barely separated, and between them, a small gap.
4. Now that you've used the area table, place the mode corner on the same spot (on top of the first z shelf) and place the third yukka from your hand on top of it. Afterwards, remove it. From there you should have a z shelf flat on the ground and 3 yukkas closely spaced together and between them, a small gap.
5. After the mode corner, use the lodge occassional table. Place the table on top of the z shelf which is flat on the ground. Now take your 4th yukkas from your hand and place it on top of the lodge table and remove the lodge table afterwards. From there, you should have the same z shelf flat on the ground, 4 yukkas closely spaced together, and a small gap between them.
Now, you have basically completed most of close stacking. But if your structure is much too short for your taste, simply place your 3rd z shelf on top of the first z shelf. But be warned, while stacking, you should NEVER remove the first z shelf from it's spot unless you're ready to stack on another square.
6. So if you want to go further than 4 levels, place your 3rd z shelf on top of your first z shelf. From there, you should have 2 z shelves on top of each other and 4 closely stacked yukkas on top of the two shelves. From there, place your 2nd z shelf on top of your 3rd z shelf (which is on top of you first z shelf). From there, you should see 3 z shelves on top of each other. Remove your 3rd z shelf (the one in the middle) and place your next yukka on top. After, remove your 2nd z shelf.
7. Right now, you should have 1 z shelf flat on the ground with 5 yukkas closely stacked on top with a gap between the two. From here, place your 3rd z shelf on top of your 1st z shelf (which is flat on the ground). Now, place your area table on top of the 3rd z shelf. From here, you should have 2 z shelves on top of each other with an area table on top. Remove your 3rd z shelf (the second one from the ground) so that there should be a small gap between the area table and the first z shelf. Now, place your next yukka on top of the area table and remove the area table afterwards.
8. Now, place your 3rd z shelf on top of your first z shelf again and place the mode corner on top of it. Remove your 3rd z shelf and add your next yukka on top of the mode corner. Remove your mode corner.
9. Place your 3rd z shelf (once again) on top of your first z shelf (which is the one flat on the ground) and place your lodge table on it. Remove your 3rd z shelf (which is the second one from the ground) and place your next yukka on top of your lodge occassional table.
Congratulations, you have completed 8 levels of close stacking. If your desired structure is still too short for your taste, please follow on for the last 2 instructions.
10. After, place your 3rd z shelf on top of your first z shelf once again. After, place your 2nd z shelf on top of your 3rd z shelf so that you would have 3 z shelves stacked on top of each other. From there, remove your 3rd z shelf (the one in the middle) and place it on top of your second z shelf as if you were stacking normally with 2 z shelves. From there, you should have 1 z shelf flat on the ground and 2 stacked on top of each other above it with a small gap in between. From there, remove your second z shelf (which is the one in the middle) and place your next yukka on top of your 3rd z shelf (which is now the highest one from the ground).
11. From here, if you understood the guide, you
should be seeing a small pattern. Follow the same pattern from here until your structure has reached the desired size. I hope you have not stressed too much over reading this complicated guide, but if you do not understand, please try and re read it over and over again carefully until you do. If not, pm me (.x.Taurus.x.) and I may be able to teach you personally on .com.
Thank you for reading my guide, I sincerely hope you enjoyed this.
Feel free to ask me questions,
.x.Taurus.x.
Ellis