MSN & Belkin

[rnix]

Well 2 nights ago i tried putting a wep thingy on my belkin router, which mucked it up so i had to reset it and set it back up on my sisters laptop, now my internet cuts off like every 5 minutes :s its really annoying, but when i try to disagnose the problem there isnt one :s


Any help?


Maybe wrong section but i would get more help here (:

[myke]

I think it might be the channel number your on... before, I tried it on a different channel and it worked fine.

[rnix]

What do you mean channel?

this:

http://img.habboupload.com/1237629563.jpg

[scottish]

Wireless operates on a channel, you can change it by going into router settings (192.168.2.1) default pass is blank. then theres a setting such as "SSID and Channel" under wireless section.

[rnix]

Ok, i changed it to two.
Whats the turbo mode thingy?

[scottish]

. .
If you have 802.11b clients on the network, though, it will slow things down to 11 Mbps as I mentioned. To keep things running at 54 Mbps speeds, there's a "turbo mode" that basically turns off the 802.11b compatibility. It only allows 802.11g clients to connect, so you get top-speed data throughput.

[parky1306]

The channel needs to be changed to 7 or 11, and it should work fine then. Also if you have cordless phones this could be why you have to change channels as the 802.11g/b is the same frequency as the house phone, so change the channel to 7 or 11 and it should be fine

[Laggings]

EDIT: Spent 20 minutes writing a reply, and it's just been posted above me :l

I agree with above, is what I was going to say.