Wired Help

[j0rd]

I really need help with Wired, me and a friend are trying to create a Wired racing room with a twist, but theres a problem.

When racing you have to stand on the arrow facing whichever direction you want your furniture to move, this will then keep going until you step off the arrow.

However when adding wired to an arrow, it only moves 1 square forward instead of moving multiple squares forward, I have tried adding 'Repeat Effect' triggers to the top of the movement but it doesn't work.

Do you have any ideas how I would work this or what I am doing wrong?

My current setup is:
Wired Effect: Move and Rotate Furni
Wired Trigger: User Walks On Furni

+REP to anyone who can help :)

[Mathew]

Hey,
You're gonna need to use:

WIRED Condition: Furni has users
WIRED Trigger: Repeat Effect
WIRED Effect: Move And Rotate Furni

Good luck :D

[j0rd]

Just tried that but the furni keeps moving even though I'm not on the arrow?

Thanks though Mathew!

[Plebings]

Matthews method should work:

Make sure it's the Furni has Users condition, not the Triggering user is on Furni condition

Link the CONDITION to the arrow you wish - only link one per arrow
Link the EFFECT to the item and make sure there is no delay, make sure the direction is also right
Have the TRIGGER go off every 0.5/1.0 seconds as you see fit

It'll cost you 60c altogether with 4 of each tower