PDA

View Full Version : Watercooling........ again



scottish
17-10-2011, 11:08 PM
Well basically got a new computer recently but I want watercooling again

I'm buying a 6950 2GB tomorrow and returning my 6870 1GB as it's faulty

So will be cooling my gfx card + CPU

YOUR BASKET
1 x Xigmatek Elysium Full Tower Windowed Case - Black (http://www.overclockers.co.uk/showproduct.php?prodid=CA-010-XG) £149.99
1 x Hardware Labs Black ICE SR-1 360 Radiator (http://www.overclockers.co.uk/showproduct.php?prodid=WC-030-BX) £83.98
1 x EK HD6970 Full Cover Waterblock - Nickel Plexi **EN Nickel Plating** (http://www.overclockers.co.uk/showproduct.php?prodid=WC-110-EK) £74.99
1 x Laing 18W DDC-Pump 12V DDC-1T Plus (http://www.overclockers.co.uk/showproduct.php?prodid=WC-047-AC) £59.99
1 x EK Supreme HF CPU Waterblock - Nickel Plexi **2011 Compatible** (http://www.overclockers.co.uk/showproduct.php?prodid=WC-051-EK) £49.99
1 x XSPC Acrylic Tank Reservoir for Laing DDC (http://www.overclockers.co.uk/showproduct.php?prodid=WC-017-XS) £24.98
2 x Mayhems Aurora -Tharsis Red Coolant 1L (http://www.overclockers.co.uk/showproduct.php?prodid=WC-009-MH) £14.99 (£29.98)
1 x OcUK Tube Cutter Aluminum 3-14mm (http://www.overclockers.co.uk/showproduct.php?prodid=WC-010-OK) £8.50
10 x BitFenix Spectre LED RED 120mm Fan (http://www.overclockers.co.uk/showproduct.php?prodid=FG-008-BX) £6.49 (£64.90)
8 x Bitspower Matt Black 1/2" High Flow Barb (G1/4") WAAD-193 (http://www.overclockers.co.uk/showproduct.php?prodid=WC-062-BP) £3.25 (£26.00)
4 x XSPC 7/16" ID [16/11mm] High Flex Hose - Clear (http://www.overclockers.co.uk/showproduct.php?prodid=WC-031-XS) £2.99 (£11.96)
2 x EK PSC Compression Fitting 7/16 [16/11mm] - G1/4 - Nickel [3831109845011] (http://www.overclockers.co.uk/showproduct.php?prodid=WC-107-EK) £2.99 (£5.98)
1 x OcUK Value PSU Bridging Connector (24 Pin) (http://www.overclockers.co.uk/showproduct.php?prodid=WC-021-OK) £1.30
Total : £610.25 (includes shipping : £14.75).

http://www.overclockers.co.uk/pimg/CA-010-XG_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=CA-010-XG) http://www.overclockers.co.uk/pimg/WC-030-BX_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-030-BX) http://www.overclockers.co.uk/pimg/WC-110-EK_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-110-EK) http://www.overclockers.co.uk/pimg/WC-047-AC_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-047-AC) http://www.overclockers.co.uk/pimg/WC-051-EK_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-051-EK) http://www.overclockers.co.uk/pimg/WC-017-XS_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-017-XS) http://www.overclockers.co.uk/pimg/WC-009-MH_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-009-MH) http://www.overclockers.co.uk/pimg/WC-010-OK_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-010-OK) http://www.overclockers.co.uk/pimg/FG-008-BX_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=FG-008-BX) http://www.overclockers.co.uk/pimg/WC-062-BP_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-062-BP) http://www.overclockers.co.uk/pimg/WC-031-XS_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-031-XS) http://www.overclockers.co.uk/pimg/WC-107-EK_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-107-EK) http://www.overclockers.co.uk/pimg/WC-021-OK_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-021-OK)

Thoughts etc?

Jin
18-10-2011, 12:55 AM
Can I ask is that £610 spent on just your cooling system?

Recursion
18-10-2011, 06:54 AM
Why are you watercooling?

N!ck
18-10-2011, 11:48 AM
I think your tubing is too thick for the rest or your stuff.

scottish
18-10-2011, 12:13 PM
Can I ask is that £610 spent on just your cooling system?

Well £150 is on case, but other than that yeh


Why are you watercooling?

So I can OC without giving a **** about airflow :p

and the normal "it looks cool"


I think your tubing is too thick for the rest or your stuff.

Yeah it's meant to be like that for a tight fit.

N!ck
18-10-2011, 12:53 PM
Yeah it's meant to be like that for a tight fit.

Quite. I read it wrong and thought you were putting 7/16" tubing on 1/4" connectors which is not going to work. I see my mistake now.

Stephen!
18-10-2011, 02:28 PM
I would recommend you go with the XSPC Dual 5.25" Bay Reservoir instead of the pump top, looks a hell of a lot better.

scottish
18-10-2011, 02:42 PM
bay res comes with built in pump doesn't it

I have a XSPC Dual 5.25" Bay Res + Pump set atm and it failed (or atleast most likely cause for temps spiking to 95°)

******* annoying posting on this forum as the black skin is still ****** and all the other skins are ****.

Jin
18-10-2011, 08:53 PM
So I can OC without giving a **** about airflow :p

and the normal "it looks cool"

Forgive my ignorance but if you are spending £610 on a cooling system and case so you can overclock and get a little bit more bang out your processor why not spend that money on a better processor or am I missing the point here? :S

scottish
18-10-2011, 09:01 PM
Well technically its £377 on cooling.

£150 is on case as the one I recently bought is annoying and small.

Another £65 is on 10x 120mm fans

And majority of it will be useful for future builds (only the 2 water blocks will need to be replaced)

Recursion
18-10-2011, 10:44 PM
You can get a Sandybridge from 3.2 stock to 5.0 on air easily, you don't need watercooling IMO...

Just sayin'

scottish
18-10-2011, 10:52 PM
Got it to 4.5ghz on air but was hitting 70 degrees

Defocus
18-10-2011, 11:08 PM
*REMOVED*

Edited by Infectious (Forum Super Moderator): Please do not be rude!

scottish
18-10-2011, 11:15 PM
*REMOVED*

Pointless question is pointless.

Edited by Infectious (Forum Super Moderator): Please do not make pointless posts!

Recursion
18-10-2011, 11:29 PM
Got it to 4.5ghz on air but was hitting 70 degrees

What kinda settings are you running? Mine's stable on 4.5 and rarely goes above 50 at full load.

scottish
18-10-2011, 11:45 PM
Air flow in the case is ****, can't remember vcore etc I had as i dropped it back down as I didn't like temps 70+ :p

On stock speed at idle its about 40 degrees, gfx 65.

But gfx card is always running at high load as it's faulty card which will get RMA'd next week after my 6950 arrives tomorrow

Defocus
19-10-2011, 12:05 AM
You are an actual idiot if you're spending £610 on water cooling, like seriously, are you that ******* stupid

scottish
19-10-2011, 12:52 AM
Not everyone lives off job seekers allowance with parents who are constantly high or drunk.

Recursion
19-10-2011, 08:16 AM
You are an actual idiot if you're spending £610 on water cooling, like seriously, are you that ******* stupid

You just topped Metric1 on my "fool of the year" list.

scottish
27-10-2011, 04:45 PM
Ok, changed it a bit

YOUR BASKET
1 x Xigmatek Elysium Full Tower Windowed Case - Black (http://www.overclockers.co.uk/showproduct.php?prodid=CA-010-XG) £149.99
1 x OcUK D5 Vario Pump & EK D5 X-Top V2 Value Combo (http://www.overclockers.co.uk/showproduct.php?prodid=WC-030-OE) £81.98
1 x EK Supreme HF CPU Waterblock - Nickel Plexi **2011 Compatible** (http://www.overclockers.co.uk/showproduct.php?prodid=WC-051-EK) £49.99
1 x XSPC EX360 120mm Radiator - Black (http://www.overclockers.co.uk/showproduct.php?prodid=WC-085-XS) £49.99
1 x Lamptron FC5 V2 5.25" Bay Fan Controller - Black (http://www.overclockers.co.uk/showproduct.php?prodid=BB-001-LP) £34.99
1 x XSPC Single 5.25” Bay Reservoir - Multi Fascia (http://www.overclockers.co.uk/showproduct.php?prodid=WC-063-XS) £24.98
1 x Masterkleer Hose Pack PVC 15,9/11mm (7/16ID) Clear 3.3m (http://www.overclockers.co.uk/showproduct.php?prodid=WC-047-OE) £10.88
1 x OcUK Tube Cutter Aluminum 3-14mm (http://www.overclockers.co.uk/showproduct.php?prodid=WC-010-OK) £8.50
2 x Mayhems X1 UV Oil Black Premixed Watercooling Fluid 1L (http://www.overclockers.co.uk/showproduct.php?prodid=WC-003-MH) £7.99 (£15.98)
6 x BitFenix Spectre LED RED 120mm Fan (http://www.overclockers.co.uk/showproduct.php?prodid=FG-008-BX) £6.49 (£38.94)
1 x Masterkleer 7/16" ID [16/11mm] Tubing Clear/UV Blue (http://www.overclockers.co.uk/showproduct.php?prodid=WC-078-OK) £3.74
4 x EK-PSC Adapter Rotary 45° G1/4 Nickel (http://www.overclockers.co.uk/showproduct.php?prodid=WC-135-EK) £3.59 (£14.36)
11 x EK PSC Compression Fitting 7/16 [16/11mm] - G1/4 - Nickel [3831109845011] (http://www.overclockers.co.uk/showproduct.php?prodid=WC-107-EK) £2.99 (£32.89)
4 x EK 12mm (1/2") G1/4 High-Flow Fitting (http://www.overclockers.co.uk/showproduct.php?prodid=WC-075-EK) £2.96 (£11.84)
1 x OcUK Value PSU Bridging Connector (24 Pin) (http://www.overclockers.co.uk/showproduct.php?prodid=WC-021-OK) £1.30
50 x PrimoChill Barbed T - UV Red - 1/2" (http://www.overclockers.co.uk/showproduct.php?prodid=WC-023-PM) £0.01 (£0.50)
Total : £551.18 (includes shipping : £16.85).

http://www.overclockers.co.uk/pimg/CA-010-XG_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=CA-010-XG) http://www.overclockers.co.uk/pimg/WC-030-OE_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-030-OE) http://www.overclockers.co.uk/pimg/WC-051-EK_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-051-EK) http://www.overclockers.co.uk/pimg/WC-085-XS_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-085-XS) http://www.overclockers.co.uk/pimg/BB-001-LP_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=BB-001-LP) http://www.overclockers.co.uk/pimg/WC-063-XS_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-063-XS) http://www.overclockers.co.uk/pimg/WC-047-OE_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-047-OE) http://www.overclockers.co.uk/pimg/WC-010-OK_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-010-OK) http://www.overclockers.co.uk/pimg/WC-003-MH_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-003-MH) http://www.overclockers.co.uk/pimg/FG-008-BX_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=FG-008-BX) http://www.overclockers.co.uk/pimg/WC-078-OK_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-078-OK) http://www.overclockers.co.uk/pimg/WC-135-EK_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-135-EK) http://www.overclockers.co.uk/pimg/WC-107-EK_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-107-EK) http://www.overclockers.co.uk/pimg/WC-075-EK_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-075-EK) http://www.overclockers.co.uk/pimg/WC-021-OK_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-021-OK) http://www.overclockers.co.uk/pimg/WC-023-PM_60.jpg (http://www.overclockers.co.uk/showproduct.php?prodid=WC-023-PM)

Removed the GPU block, as i'll add it in the Summer

Changed the rad to XSPC new series EX, changed tube res to bay res, changed fittings a bit, added a T Line so it's easier to drain.

Also getting a few stuff from SpecialTech

6x 3 Pin Fan Cable Extension, 2x 6 Pin PCIe Power Extension, 4 Pin ATX12V Extension, ATX 24 Pin Extension for £47

all of above will be the BitFenix Alchemy Pre-braided red cables.

I'll also most be getting a Sealing Plug with 1/2" ID from SpecialTech and 1/4" T Fitting.

Possibly an in-line temperature sensor and flow sensor, unsure atm.


Any suggestions? :)

Want to hide these adverts? Register an account for free!