Can someone post a noob friendly guide on Double Djing with SAM3.
Without putting mic to speakers on skype.
Screenies would help. Thanks! DJ SuperSam www.habbcrazy.com
Thread closed by Jordan (Forum Super Moderator): Due to bump
Printable View
Can someone post a noob friendly guide on Double Djing with SAM3.
Without putting mic to speakers on skype.
Screenies would help. Thanks! DJ SuperSam www.habbcrazy.com
http://h1.ripway.com/Knuckles/doubleDJ.swf :]
Thanks to Grig for this guide.Quote:
A Few points before I start
Double DJing is not for everyone.
Some people will just not have a soundcard that allows them to use stereo mix. Therefore Double DJing can not be done. But for some of you who may. Then this tutorial will work fine =] Also you need to work this out without the screenshots as the ones I took became bad
Step 1.
First off. Load up your Sam Broadcaster and click on Config. From that you should get your Voice FX Configuration. Make sure you have encoders selected and click Mixer.
Step 2.
Now you should have Recording Control open. Click Options ; Properties and make sure recording is selcted. Now below make sure Stereo Mix/Recording is selected and also Microphone is. Then press ok. (Some people will not have stereo mix. If not then your soundcard is not good enough. Therefore Double DJing is out of the window.
Step 3. (The most important step. May need to read a few times)
Now. You will be back at recording control. You should now see Stereo mix there aswell as everything. Well move you stereo mix bar just under half way. Now when you tick select, it will mean that your now talking from your soundcard so basically when the other person on skype talks they will hear themselves and hear the song your playing if you play it. Or whatever. So when Double Djing leave your recording control open. Remember this and remember when you talk Stereo mix MUST be selected.
I know what your now thinking. How will people be able to hear me when I have stereo mix on. Well they wont. Unless you unmute your mic. To do this double click on the Speaker in your toolbar which is in the bottom right of your screen. Now you should have Volume Control open. Click Options ; Properties and this time make sure you have playback checked and microphone checked.
Step 4.
Right. Now make sure microphone is unticked on mute. Now people will hear you on stereo mix. And yes you will hear yourself. Get used to it. Right. Now. DJ like normal on Sam. But when talking. The red dot MUST be selected when talking, Stereo Mix MUST be selected and you MUST be unmuted. Here is the red dot on encoders.
If I am correct this process should work, took me a while to get through it and another while to take screenshots which I deleted lol. Anyway this may look hard, but it isnt once you got this your double DJ show should go smoothly.
Quote:
Originally Posted by KnuxIBF
Hey i understand all of that except:
Make sure the other person has registered their voice.
How do you do that on SAM3 Broadcaster?
I mean, if they connect aswell it won't let them...
+rep for swf nyway :)
Make sure you're both on Skype or MSN at the same time and talking to each other. Then that'll let listeners hear them xD
And can I just say, My guide's better than Grig's, soz.
In answer to your question, you will see the decibel meter going up and down by the encoder? Well, if it's going up and down when the DJ on skype is talking, they've been picked up or "registered" by SAM.
Quote:
Originally Posted by H0BJ0B
Thanks alot for all your help!
Best Wishes,
DJ SuperSam - www.HabbCrazy.net
Myn is better soz go home- your on the losing team!Quote:
Originally Posted by KnuxIBF
Back to subject- pm me if you want and I will give you some tips on how to improve the double djing quality and it sometimes can get quite a bit laggy.
hey sereo mix dont come up on mine so does this mean i cant double dj or can you upgrade your soundcard?
Is there a way to double dj on a program ment for mac? (ie. Nicecast?)