How do i find an open port?

Quote:

---

Originally Posted by Stephen

check on www.portforward.com for the model and guide if you haven't already.

---

Cant find model on mine.

Quote:

---

Originally Posted by Jak-ish

I will dont worry -.-

and it said it by netgear lol, but sky gave it to us

---

They do give them out at random...
If you go to
http://192.168.0.1
And enter the Username: admin
Password: sky
Does it look like this?
http://img397.imageshack.us/img397/8...yrouteraj3.png

Quote:

---

Originally Posted by Mounta1nGoat

They do give them out at random...
If you go to
http://192.168.0.1
And enter the Username: admin
Password: sky
Does it look like this?
http://img397.imageshack.us/img397/8...yrouteraj3.png

---

That the one babe ;)x

Quote:

---

Originally Posted by Jak-ish

That the one babe ;)x

---

Ok this SHOULD work.
Click the security tab then click services .
Then click add underneath the table
You'll have the following things to enter:
Name:<sensiblename>
Type: TCP, UDP, TCP/UDP
Start Port:<port you want open/forwarded>
Finish Port:<^>


After that click apply and go to firewall rules and allow incoming/outgoing(depends) on that port.

What do i type for finish port?

"^"

aye?

Edit: what do i put for finish port LOL

Quote:

---

Originally Posted by Jak-ish

What do i type for finish port?

"^"

aye?

Edit: what do i put for finish port LOL

---

Same as start port as I'm guessing you don't want to open a range.
That way if I put port 3460(random example :P) It would only use that port for the service but if I put 3460 as the start port and 3470 as the finish port it would open 3460, 3470 and every port inbetween the two.

If that made no sense just put it as the same as the start port.

Quote:

---

Originally Posted by Mounta1nGoat

Same as start port as I'm guessing you don't want to open a range.
That way if I put port 3460(random example :P) It would only use that port for the service but if I put 3460 as the start port and 3470 as the finish port it would open 3460, 3470 and every port inbetween the two.

If that made no sense just put it as the same as the start port.

---

Doesnt seem to work :S.

It all set up and everything, so what he problem here then??

Quote:

---

Originally Posted by Jak-ish

Doesnt seem to work :S.

It all set up and everything, so what he problem here then??

---

Have you selected it on the firewall rules on the router?

What program are you trying to allow?

what do i type for

Quote:

---

Send to LAN Server:
WAN Users

---

thanks