-
Watercooling........ again
-
Can I ask is that £610 spent on just your cooling system?
-
Why are you watercooling?
-
I think your tubing is too thick for the rest or your stuff.
-
Quote:
Originally Posted by
Jin
Can I ask is that £610 spent on just your cooling system?
Well £150 is on case, but other than that yeh
Quote:
Originally Posted by
Recursion
Why are you watercooling?
So I can OC without giving a **** about airflow :p
and the normal "it looks cool"
Quote:
Originally Posted by
N!ck
I think your tubing is too thick for the rest or your stuff.
Yeah it's meant to be like that for a tight fit.
-
Quote:
Originally Posted by
scottish
Yeah it's meant to be like that for a tight fit.
Quite. I read it wrong and thought you were putting 7/16" tubing on 1/4" connectors which is not going to work. I see my mistake now.
-
I would recommend you go with the XSPC Dual 5.25" Bay Reservoir instead of the pump top, looks a hell of a lot better.
-
bay res comes with built in pump doesn't it
I have a XSPC Dual 5.25" Bay Res + Pump set atm and it failed (or atleast most likely cause for temps spiking to 95°)
******* annoying posting on this forum as the black skin is still ****** and all the other skins are ****.
-
Quote:
Originally Posted by
scottish
So I can OC without giving a **** about airflow :p
and the normal "it looks cool"
Forgive my ignorance but if you are spending £610 on a cooling system and case so you can overclock and get a little bit more bang out your processor why not spend that money on a better processor or am I missing the point here? :S
-
Well technically its £377 on cooling.
£150 is on case as the one I recently bought is annoying and small.
Another £65 is on 10x 120mm fans
And majority of it will be useful for future builds (only the 2 water blocks will need to be replaced)
-
You can get a Sandybridge from 3.2 stock to 5.0 on air easily, you don't need watercooling IMO...
Just sayin'
-
Got it to 4.5ghz on air but was hitting 70 degrees
-
*REMOVED*
Edited by Infectious (Forum Super Moderator): Please do not be rude!
-
*REMOVED*
Pointless question is pointless.
Edited by Infectious (Forum Super Moderator): Please do not make pointless posts!
-
Quote:
Originally Posted by
scottish
Got it to 4.5ghz on air but was hitting 70 degrees
What kinda settings are you running? Mine's stable on 4.5 and rarely goes above 50 at full load.
-
Air flow in the case is ****, can't remember vcore etc I had as i dropped it back down as I didn't like temps 70+ :p
On stock speed at idle its about 40 degrees, gfx 65.
But gfx card is always running at high load as it's faulty card which will get RMA'd next week after my 6950 arrives tomorrow
-
You are an actual idiot if you're spending £610 on water cooling, like seriously, are you that ******* stupid
-
Not everyone lives off job seekers allowance with parents who are constantly high or drunk.
-
Quote:
Originally Posted by
Defocus
You are an actual idiot if you're spending £610 on water cooling, like seriously, are you that ******* stupid
You just topped Metric1 on my "fool of the year" list.
-
Ok, changed it a bit
YOUR BASKET
1 x Xigmatek Elysium Full Tower Windowed Case - Black £149.99
1 x OcUK D5 Vario Pump & EK D5 X-Top V2 Value Combo £81.98
1 x EK Supreme HF CPU Waterblock - Nickel Plexi **2011 Compatible** £49.99
1 x XSPC EX360 120mm Radiator - Black £49.99
1 x Lamptron FC5 V2 5.25" Bay Fan Controller - Black £34.99
1 x XSPC Single 5.25” Bay Reservoir - Multi Fascia £24.98
1 x Masterkleer Hose Pack PVC 15,9/11mm (7/16ID) Clear 3.3m £10.88
1 x OcUK Tube Cutter Aluminum 3-14mm £8.50
2 x Mayhems X1 UV Oil Black Premixed Watercooling Fluid 1L £7.99 (£15.98)
6 x BitFenix Spectre LED RED 120mm Fan £6.49 (£38.94)
1 x Masterkleer 7/16" ID [16/11mm] Tubing Clear/UV Blue £3.74
4 x EK-PSC Adapter Rotary 45° G1/4 Nickel £3.59 (£14.36)
11 x EK PSC Compression Fitting 7/16 [16/11mm] - G1/4 - Nickel [3831109845011] £2.99 (£32.89)
4 x EK 12mm (1/2") G1/4 High-Flow Fitting £2.96 (£11.84)
1 x OcUK Value PSU Bridging Connector (24 Pin) £1.30
50 x PrimoChill Barbed T - UV Red - 1/2" £0.01 (£0.50)
Total : £551.18 (includes shipping : £16.85).
http://www.overclockers.co.uk/pimg/CA-010-XG_60.jpg http://www.overclockers.co.uk/pimg/WC-030-OE_60.jpg http://www.overclockers.co.uk/pimg/WC-051-EK_60.jpg http://www.overclockers.co.uk/pimg/WC-085-XS_60.jpg http://www.overclockers.co.uk/pimg/BB-001-LP_60.jpg http://www.overclockers.co.uk/pimg/WC-063-XS_60.jpg http://www.overclockers.co.uk/pimg/WC-047-OE_60.jpg http://www.overclockers.co.uk/pimg/WC-010-OK_60.jpg http://www.overclockers.co.uk/pimg/WC-003-MH_60.jpg http://www.overclockers.co.uk/pimg/FG-008-BX_60.jpg http://www.overclockers.co.uk/pimg/WC-078-OK_60.jpg http://www.overclockers.co.uk/pimg/WC-135-EK_60.jpg http://www.overclockers.co.uk/pimg/WC-107-EK_60.jpg http://www.overclockers.co.uk/pimg/WC-075-EK_60.jpg http://www.overclockers.co.uk/pimg/WC-021-OK_60.jpg http://www.overclockers.co.uk/pimg/WC-023-PM_60.jpg
Removed the GPU block, as i'll add it in the Summer
Changed the rad to XSPC new series EX, changed tube res to bay res, changed fittings a bit, added a T Line so it's easier to drain.
Also getting a few stuff from SpecialTech
6x 3 Pin Fan Cable Extension, 2x 6 Pin PCIe Power Extension, 4 Pin ATX12V Extension, ATX 24 Pin Extension for £47
all of above will be the BitFenix Alchemy Pre-braided red cables.
I'll also most be getting a Sealing Plug with 1/2" ID from SpecialTech and 1/4" T Fitting.
Possibly an in-line temperature sensor and flow sensor, unsure atm.
Any suggestions? :)
