Welcome to Habbox Forum. If you're reading this then its likely that you're a new member in need of some help. Hopefully this guide will provide you with the basics of how the forum works.
To keep things simple the guide has been split up into different sections. Click the section you wish to read and you will be taken straight to it.
If you require any further information then head over to our FAQS (Here), or feel free to contact General Management, Forum Management or a member of the moderation department. :)
If you find any errors in the guide then please contact Forum Management. :)
10-03-2013, 12:48 PM
Chris
What is HabboxForum? Written by Chris
HabboxForum is an online discussion site. Here we discuss a range of subjects from Habbo to pretty much anything you can think of!
How does it work?
The forum contains a whole load of categories which contain forums inside. For example, we have the Habbo Category which is a broad subject range, but inside this category we have more specific subject areas, e.g. Habbo Discussion. The forums inside the categories contain things which we call threads.
What are posts and threads?
A thread is a discussion between HabboxForum members. Each thread starts with a single post which contains the subject of the discussion. The thread then grows as more individual posts are made by forum members.
There is also another type of thread called a sticky thread. Stuck threads always remain at the top of the forum, even when they haven’t been posted in. A sticky thread is normally created by Forum Staff to make important information visible at all times.
Keep reading for information on creating threads.
How do I post?
A post is a message that is submitted by a member in a thread. The post contains their reply to the thread and should normally offer some sort of contribution to the discussion. It is possible for posts to be edited but this can only be done within 15 minutes of making the post.
Keep reading for information on making posts.
10-03-2013, 12:49 PM
Chris
How do I create a thread? Written by Nick
Creating a thread on HabboxForum is simple! First of all, think of what category and forum you should put your topic in. Once you have chosen the appropriate category and forum for your topic to go in, you will click the forum name, e.g 'Habbo discussion'. You will be taken to a page which will contain multiple threads that other members have created.
Give your thread a title, e.g 'How do i make a room on Habbo'. Type your message in the editor. If you would like to see what your message would look like before you submit your thread, next to 'Submit New Thread' under the editor, there is another button that says 'Preview Post'. Once you are happy with what you wrote you can go ahead and click 'Submit New Thread' which is located under the editor also.
10-03-2013, 12:59 PM
Chris
How do I make a post? Written by Chris
Making a post in a thread is quick and easy. All you have to do is find a thread you want to reply to and click the following button which is found at the top and bottom of a thread (Button will look different depending on the skin you are using).
From here you have 2 options. You can either type in your reply here and click the 'Post Quick Reply' button, or you can click the 'Go Advanced' button which will give you this page:
The advanced editor contains more options than the quick reply editor as you can see from the image above. The quick editor also allows you to preview your post before making it public. To do this just click the 'Preview Post' button. Once you are happy with your post, click the 'Submit Reply' button.
10-03-2013, 01:34 PM
Chris
How do I edit my profile? Written by Chris
Editing your profile is simple. To find your profile settings, just click the 'Settings' button as highlighted in the image below.
From here you can edit all of your settings. An explanation as to what each section does is below:
Edit Profile
Clicking this will allow you to change the information displayed on your public profile. This includes your date of birth, habbo name, likes and dislikes, etc.
Edit Profile Picture
This is a small image that displays on your public profile. For more information on this click here.
Edit Avatar
This is a small image that displays in your posts. For more information on this click here.
Edit Signature
This is an area which appears at the end of all your posts. You can put pretty much anything in here including images. For more information on this click here.
10-03-2013, 01:37 PM
Chris
How do I change my Avatar? Written by Bolt660
So you want to change your avatar? Your Avatar is the little picture which appears next to every post you make on the forum. This can either be a static image or a moving gif image. Everyone will be able to see your avatar. It is important that your avatar is in line with the forum rules and is not too big. You can read more about that later! Here is an example of an avatar:
So how do you get an avatar to appear? Well its actually very simple. Simply hover your mouse over your username at the top of the forum and in the drop-down menu you should see a 'Settings' - Click that and then navigate to 'Edit Avatar' link under My Settings.
Once on this screen you can then proceed to upload your new avatar. Alternatively, you could use one of the pre-made avatars which will appear at the bottom of the screen. We currently have a small selection of summer avatars available for use.
If you would like to upload your own new avatar, then you can either upload a picture from your computer, or you can enter a URL of an image off another site to use.
Have fun with your new avatar!
10-03-2013, 01:41 PM
Chris
How do I change my Signature? Written by Nick
So you want to change your signature? Members that have 5 or more posts are able to edit their signatures. If you are new to the forum you will have to post 5 times to be able to edit your signature. You should read the rules already on signature limits as your signature picture may vary depending on which usergroup you may be in.
Once you have your 5 posts you are now ready to edit your signature! To change your signature you can follow the same steps as changing your avatar above... you simply hover your mouse over your username at the top of the forum and in the drop-down menu you should see 'Settings' - Click that and then navigate to 'Edit Signature' link under My Settings.
Once you are happy with your signature, click 'Save Signature' and presto, you have a forum signature!
10-03-2013, 01:44 PM
Chris
How do I tag users into my posts? Written by xxMATTGxx
This part of the guide explains how you can use the user tagging system which is also known as mentioning another user. There is two main ways of doing this and below shows you both ways and how they work.
The following must be done: @username; - The semi-colon at the end needs to be there to make sure it works for all users. If it isn't there then the mention will not work.
Using the BBCode Button in Quick Reply & Advanced Editor:
The button on the quick reply editor and the full advanced editor has the same https://habbox.com/staffupload/../ass...dd2dab695b.png image for what can be used to mention another user in your post. To use this button then do the following:
Finish your post. A semi colon is not needed if you are using the button method, the first method the semi-colon is needed.
Note: The buttons will not appear if you are using the "Basic Editor" - You can change the editor by going to User CP > General Settings.
Hope this helps and prevents any confusion.
10-03-2013, 01:46 PM
Chris
How do I use BB code? Written by Nick
BBCodes are an important feature to any forum as it will let you format you posts to make them looks all nice and pretty. They are very simple to use. BBCodes are very similar to HTML but instead you use square brackets. For example, you want to add an image to your post, you would simply do this
Code:
[IMG]*Insert image url here*[/IMG]
First you would write the 'code' for your tag, in this case ours was IMG. On the other side of the IMG tag you will want to write it again but with a '/' infront of it, so it knows to identify the url as a picture. Then if you want to get a picture of the internet, right click and click 'copy image url' and paste it in the middle of the 2 tags or simply upload your own picture to an image uploading site.
Most of the fourms BBCodes are located in the top of the text editor for ease of access
Below is a short list of the most common BBCodes and what they do.
Spoiler
PHP Code:
[SPOILER]*Content goes here*[/SPOILER]
What does a spoiler do?
A Spoiler a rectangular box where you can hide the contents to what happens in a movie or a quiz on habbo.
Bad Spoiler
PHP Code:
[BADSPOILER]Content[/BADSPOILER]
What do the BadSpoiler tags do?
A Bad Spoiler is exactly the same as a spoiler but is there for putting in videos or pictures in with mild swearing.
Bold
PHP Code:
[B]*Content goes here*[/B]
What do the B tags do?
The B tags Bold text for you.
Underline
PHP Code:
[U]*Content goes here*[/U]
What do the U tags do?
The U tags Underline text.
Italic
PHP Code:
[I]*Content goes here*[/I]
What do the Italic tags do?
The I tags simply make your text italic.
Font
PHP Code:
[FONT=*Font of your choice*]*Content goes here*[/FONT]
What do the Font tags do?
The Font tags simply change the font of the text. You can only choose from the fonts installed on the forum though. There is a drop down list in the text editor.
Color
PHP Code:
[COLOR=*Color of your choice*]*Content goes here*[/COLOR]
What do the Color tags do?
The Color tags will add color to your text when you post. You can have hexadecimal colors as well as typing in colors like red, blue, grey.
Image
PHP Code:
[IMG]*Content goes here*[/IMG]
What do the Image tags do?
The IMG/Image tags allow you to post pictures in your post. You will have to grab the picture URL and paste it in between the tags.
Video
PHP Code:
[video]*Content goes here*[/video]
What do the Video tags do?
A Video tag lets you put youtube videos in your post. When you want to post a video you will have to grab the video URL and paste it in between the video tags.
URL/Links
PHP Code:
[URL=*Link goes here*]*Content goes here*[/URL]
What do the Link/URL tags do?
The URL tags allow you to basically put a link in your post.
Quote
PHP Code:
[QUOTE]*Content goes here*[/QUOTE]
What do the Quote tags do?
If you want to quote someones post you are able to put what they said in between the quote tags and it will show up in a transparent type box of what they said. Generally if you click 'Reply with Quote' it should come up with the user you quoted in the top left hand corner.
Code
PHP Code:
[CODE]<b>Content goes here</b>[/CODE]
What do the Code tags do?
The Code tags are simillar to the PHP tags, although they do allow text to be bold, underlined, etc. They are most commonly used for images.
PHP
PHP Code:
[PHP.]<?php echo"*Content goes here*"; ?>[./PHP]
What do the PHP tags do?
The PHP tags allow you to show of your PHP, HTML, etc without rendering when you post it in a thread. Don't include the dot's if you are going to use the PHP tags.
Sound Cloud Clip
PHP Code:
[sc]URL of clip here[/sc]
What do the SoundCloud tags do?
The soundcloud tags allow you to embed soundcloud clips into your posts
Sound Cloud Playlist
PHP Code:
[scpl]URL of clip here[/scpl]
What do the SoundCloud Playlist tags do?
The soundcloud playlist tags allow you to embed whole soundcloud playlists into your posts