Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Join Date
    Oct 2006
    Location
    BUXTON
    Posts
    2,191
    Tokens
    0

    Latest Awards:

    Default How do you double dj?

    Title says it How do you double dj with no wires etc sam to skype?

  2. #2
    Join Date
    Sep 2004
    Location
    Texas, USA
    Posts
    2,333
    Tokens
    141

    Latest Awards:

    Default

    It's actually quite simple, if they do have skype you just have a call going and the DJ that is on air holds his/her mic up to the speakers. There is a way you can do it with SAM but it's complicated. I don't know how to do it on SAM but on Skype it's easier just to hold the mic up, it may not be as clear as you want it to be but it's the easiest way I think .

    Hope that helped.

    DJ-Rachy
    This is a signature, hope it's not too big.

  3. #3
    Join Date
    Sep 2007
    Location
    Blackpool
    Posts
    8,200
    Tokens
    0

    Latest Awards:

    Default

    Go on Skype whilst DJying. Easy peasy.

  4. #4
    Join Date
    Nov 2007
    Posts
    660
    Tokens
    0

    Default

    Yes, as above.
    You'd need to be in a call with the desired person to double DJ
    while connected with WINamp or SAM.

  5. #5
    Join Date
    Oct 2006
    Location
    BUXTON
    Posts
    2,191
    Tokens
    0

    Latest Awards:

    Default

    Yesh i know i mean like i want to so it so its clear like Clubhabbo etc.

  6. #6
    Join Date
    Nov 2007
    Posts
    660
    Tokens
    0

    Default

    I believe they do the same process, with very good microphones.
    I'm not sure what the term is called, but it allows you to focus onto one thing
    and excludes background noise.

    - Josh

  7. #7
    Join Date
    Oct 2006
    Location
    BUXTON
    Posts
    2,191
    Tokens
    0

    Latest Awards:

    Default

    Oh thanks ill look into it.

  8. #8
    Join Date
    Nov 2007
    Posts
    660
    Tokens
    0

    Default

    Not a problem.
    Hope I helped.

    - Josh

  9. #9
    Join Date
    Sep 2004
    Location
    Texas, USA
    Posts
    2,333
    Tokens
    141

    Latest Awards:

    Default

    Lepore posted a very good guide on how to make it clear here it is quoted below:

    Quote Originally Posted by Lepore View Post
    Heres a Guide. Hope it helps.


    A Few points before I start

    Double DJing is not for everyone.
    Some people will just not have a soundcard that allows them to use stereo mix. Therefore Double DJing can not be done. But for some of you who may. Then this tutorial will work fine =] Also you need to work this out without the screenshots as the ones I took became bad

    Step 1.

    First off. Load up your Sam Broadcaster and click on Config. From that you should get your Voice FX Configuration. Make sure you have encoders selected and click Mixer.

    Step 2.

    Now you should have Recording Control open. Click Options ; Properties and make sure recording is selcted. Now below make sure Stereo Mix/Recording is selected and also Microphone is. Then press ok. (Some people will not have stereo mix. If not then your soundcard is not good enough. Therefore Double DJing is out of the window.


    Step 3. (The most important step. May need to read a few times)

    Now. You will be back at recording control. You should now see Stereo mix there aswell as everything. Well move you stereo mix bar just under half way. Now when you tick select, it will mean that your now talking from your soundcard so basically when the other person on skype talks they will hear themselves and hear the song your playing if you play it. Or whatever. So when Double Djing leave your recording control open. Remember this and remember when you talk Stereo mix MUST be selected.

    I know what your now thinking. How will people be able to hear me when I have stereo mix on. Well they wont. Unless you unmute your mic. To do this double click on the Speaker in your toolbar which is in the bottom right of your screen. Now you should have Volume Control open. Click Options ; Properties and this time make sure you have playback checked and microphone checked.

    Step 4.

    Right. Now make sure microphone is unticked on mute. Now people will hear you on stereo mix. And yes you will hear yourself. Get used to it. Right. Now. DJ like normal on Sam. But when talking. The red dot MUST be selected when talking, Stereo Mix MUST be selected and you MUST be unmuted. Here is the red dot on encoders.

    If I am correct this process should work, took me a while to get through it and another while to take screenshots which I deleted lol. Anyway this may look hard, but it isnt once you got this your double DJ show should go smoothly.
    This is a signature, hope it's not too big.

  10. #10
    Join Date
    Nov 2007
    Posts
    162
    Tokens
    0

    Default

    I do believe this thread is 3 days old and not really relevant anymore.
    And I think ZeJosh had helped him. Making your post pointless.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •