Watercooling........ again

[Recursion]

You can get a Sandybridge from 3.2 stock to 5.0 on air easily, you don't need watercooling IMO...

Just sayin'

[scottish]

Got it to 4.5ghz on air but was hitting 70 degrees

[Defocus]

*REMOVED*

Edited by Infectious (Forum Super Moderator): Please do not be rude!

[scottish]

*REMOVED*

Pointless question is pointless.

Edited by Infectious (Forum Super Moderator): Please do not make pointless posts!

[Recursion]

Got it to 4.5ghz on air but was hitting 70 degrees

What kinda settings are you running? Mine's stable on 4.5 and rarely goes above 50 at full load.

[scottish]

Air flow in the case is ****, can't remember vcore etc I had as i dropped it back down as I didn't like temps 70+ :p

On stock speed at idle its about 40 degrees, gfx 65.

But gfx card is always running at high load as it's faulty card which will get RMA'd next week after my 6950 arrives tomorrow

[Defocus]

You are an actual idiot if you're spending £610 on water cooling, like seriously, are you that ******* stupid

[scottish]

Not everyone lives off job seekers allowance with parents who are constantly high or drunk.

[Recursion]

You are an actual idiot if you're spending £610 on water cooling, like seriously, are you that ******* stupid

You just topped Metric1 on my "fool of the year" list.

[scottish]

Ok, changed it a bit

YOUR BASKET
1 x Xigmatek Elysium Full Tower Windowed Case - Black £149.99
1 x OcUK D5 Vario Pump & EK D5 X-Top V2 Value Combo £81.98
1 x EK Supreme HF CPU Waterblock - Nickel Plexi **2011 Compatible** £49.99
1 x XSPC EX360 120mm Radiator - Black £49.99
1 x Lamptron FC5 V2 5.25" Bay Fan Controller - Black £34.99
1 x XSPC Single 5.25” Bay Reservoir - Multi Fascia £24.98
1 x Masterkleer Hose Pack PVC 15,9/11mm (7/16ID) Clear 3.3m £10.88
1 x OcUK Tube Cutter Aluminum 3-14mm £8.50
2 x Mayhems X1 UV Oil Black Premixed Watercooling Fluid 1L £7.99 (£15.98)
6 x BitFenix Spectre LED RED 120mm Fan £6.49 (£38.94)
1 x Masterkleer 7/16" ID [16/11mm] Tubing Clear/UV Blue £3.74
4 x EK-PSC Adapter Rotary 45° G1/4 Nickel £3.59 (£14.36)
11 x EK PSC Compression Fitting 7/16 [16/11mm] - G1/4 - Nickel [3831109845011] £2.99 (£32.89)
4 x EK 12mm (1/2") G1/4 High-Flow Fitting £2.96 (£11.84)
1 x OcUK Value PSU Bridging Connector (24 Pin) £1.30
50 x PrimoChill Barbed T - UV Red - 1/2" £0.01 (£0.50)
Total : £551.18 (includes shipping : £16.85).



Removed the GPU block, as i'll add it in the Summer

Changed the rad to XSPC new series EX, changed tube res to bay res, changed fittings a bit, added a T Line so it's easier to drain.

Also getting a few stuff from SpecialTech

6x 3 Pin Fan Cable Extension, 2x 6 Pin PCIe Power Extension, 4 Pin ATX12V Extension, ATX 24 Pin Extension for £47

all of above will be the BitFenix Alchemy Pre-braided red cables.

I'll also most be getting a Sealing Plug with 1/2" ID from SpecialTech and 1/4" T Fitting.

Possibly an in-line temperature sensor and flow sensor, unsure atm.


Any suggestions?