Double DJing Once AGAIN

[Calvin]

I know you may be thinking, How Many people have asked this :S
well Ive read all the other Double DJing threads, an i can never seem to get it working?
Do i go to sound control > properties > recording?
and which do i put on max so that every sound on my computer will play on air?
Thanks!

[,Rachyy,]

Hey there!

Okay I searched through the forums for a couple minutes and found two ways to maybe solve your problem [:!

One is a guide kindy made by Grig so a big thanks to him!
A Few points before I start

Double DJing is not for everyone.
Some people will just not have a soundcard that allows them to use stereo mix. Therefore Double DJing can not be done. But for some of you who may. Then this tutorial will work fine =] Also you need to work this out without the screenshots as the ones I took became bad

Step 1.

First off. Load up your Sam Broadcaster and click on Config. From that you should get your Voice FX Configuration. Make sure you have encoders selected and click Mixer.

Step 2.

Now you should have Recording Control open. Click Options ; Properties and make sure recording is selcted. Now below make sure Stereo Mix/Recording is selected and also Microphone is. Then press ok. (Some people will not have stereo mix. If not then your soundcard is not good enough. Therefore Double DJing is out of the window.


Step 3. (The most important step. May need to read a few times)

Now. You will be back at recording control. You should now see Stereo mix there aswell as everything. Well move you stereo mix bar just under half way. Now when you tick select, it will mean that your now talking from your soundcard so basically when the other person on skype talks they will hear themselves and hear the song your playing if you play it. Or whatever. So when Double Djing leave your recording control open. Remember this and remember when you talk Stereo mix MUST be selected.

I know what your now thinking. How will people be able to hear me when I have stereo mix on. Well they wont. Unless you unmute your mic. To do this double click on the Speaker in your toolbar which is in the bottom right of your screen. Now you should have Volume Control open. Click Options ; Properties and this time make sure you have playback checked and microphone checked.

Step 4.

Right. Now make sure microphone is unticked on mute. Now people will hear you on stereo mix. And yes you will hear yourself. Get used to it. Right. Now. DJ like normal on Sam. But when talking. The red dot MUST be selected when talking, Stereo Mix MUST be selected and you MUST be unmuted. Here is the red dot on encoders.

If I am correct this process should work, took me a while to get through it and another while to take screenshots which I deleted lol. Anyway this may look hard, but it isnt once you got this your double DJ show should go smoothly.


If that didn't do the trick I found this post by Leah so a big thanks to her!

Okay, on the task Bar, there should be this little speaker, you double click that.
then go onto options>properties>click the dropdown menu then click input> then make sure wave out mix is clicked> then click ok then click 'wave out mix' instead of microphone. then while 'wave out mix' is clicked whatever noise your computer makes it will be on air, so like if your in a call with someone on skype, that will be on air

Hope that helped in some way!

Happy DJing!
Rachyy

[Calvin]

Thanks!
That helped!

[leah]

wooo lolol

[Alexicles.]

Once you get your head round it, it's really quite simple.