yeh ok i got the watercooling and its all on and stuff, but my temps are about 40 degrees, idle.....
I applied thermal paste correctly, spread it out evenly etc and think its tightened enough?
Results 1 to 10 of 19
Thread: Watercooling
-
19-11-2009, 08:12 PM #1
Watercooling
-
LOAD TEMPS PLZ.
http://files.extremeoverclocking.com/file.php?f=211 change it to 4 cores/threads and make sure you do millions of digits like 32. Watch temps while running it.
-
Yeah, load temps! But don't use Super PI. Use a real stress program. OCCT, Prime95, LinX, Intel Burn Test
Last edited by Stephen!; 19-11-2009 at 09:13 PM.
-
Also, what processor and you using and what is it overclocked to?
Edit: Stephen posted your using a i7
What have you overclocked it to though?
-
19-11-2009, 09:34 PM #5
Its stock atm..
-
Idle temps don't mean much. Post load. Doesn't matter if it's not OC'd yet.
Originally Posted by scottish
-
19-11-2009, 10:03 PM #7
running prime95 atm
-
19-11-2009, 10:20 PM #8
Prime 95 ~ max temp was about 50, didn't change much (only done 15 tests)
Linx ~ max temp 62 degrees @ 256MB Memory 20 times
-
Temps are perfectly fine at stock for an i7. Anything up to about 85c load is considered acceptable on an i7.
-
20-11-2009, 03:28 PM #10
mm
IntelBurnTest standard stress test is hitting about 79 degrees at 4Ghz.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts